Evo X Sidewinder

BPAEVOXT4TSSW304 1.jpg
BPAEVOXT4TSSW304 2.jpg
BPAEVOXT4TSSW304 3.jpg
BPAEVOXT4TSSW304 4.jpg
BPAEVOXT4TSSW304 5.jpg
BPAEVOXT4TSSW304 6.jpg
BPAEVOXT4TSSW304 7.jpg
BPAEVOXT4TSSW304 8.jpg
BPAEVOXT4TSSW304 1.jpg
BPAEVOXT4TSSW304 2.jpg
BPAEVOXT4TSSW304 3.jpg
BPAEVOXT4TSSW304 4.jpg
BPAEVOXT4TSSW304 5.jpg
BPAEVOXT4TSSW304 6.jpg
BPAEVOXT4TSSW304 7.jpg
BPAEVOXT4TSSW304 8.jpg

Evo X Sidewinder

from 1,200.00

The BP Autosports, LLC. Evo X sidewinder exhaust manifolds are here! These manifolds are designed for large turbo, big power Evo X turbo systems that either do not have enough room to fit the turbo being used between the engine and firewall. The BP Autosports Evo X sidewinder manifold is designed to hold all sizes of T3 and T4 turbochargers, from small to large GT45 units. Additionally, these manifolds provide much easier access to your turbocharger and wastegate(s), as well as placing your turbo in a visible location to show it off!

All manifolds feature the following:

  • 1.5" schedule pipe primary construction for optimal strength, flow, exhaust gas velocity, spooling characteristics, and power

  • 304SS or exotic lightweight 321SS construction

  • Hand cut and internally welded merge collector to provide the best, most unrestricted flow into the turbine housing possible

  • M10x1.5 tapped turbine flange

  • 44mm/45mm/46mm wastegate provisioning

  • Professionally TIG welded and back purged with special attention paid to weld aesthetics; our manifolds not only perform well, but look great too!

These manifolds are available in both T3 open scroll and T4 twin scroll derivatives. We advise thermal insulation be added to your brake master cylinder, valve cover, wiring harness, and other heat-sensitive components due to the turbocharger’s inherent close proximity to them with sidewinder setups on these cars.

Known Chassis Compatibility:

  • Mitsubishi Lancer Evolution X (2007 - 2016)

**Please allow five weeks minimum for construction.  Product may differ slightly from its representative image. Please email us with any questions about this product or others we offer**

All sales are final, and non-returnable without prior authorization. If a return is accepted, a 30% restocking fee will be assessed.

Material:
Turbine Flange:
Quantity:
Add To Cart